Zx Evolution ATM 2+ compatibility

ZX evolution software and hardware

Postby justine » 01 Apr 2012, 19:51

Is the ZX Evo compatible with the ATM 2+ ?????

Can i flash the xbios rom on the EVO and run cp/m 2.2 as on the ATM 2+ ?????
User avatar
justine
 
Posts: 101
Joined: 06 Jul 2011, 00:50
Location: Scotland
Group: Registered users

Postby нолька » 02 Apr 2012, 06:02

no, there's another hdd ports standart (Nemo vs ATM)
я проснулся среди ночи и понял, что всё...
всё идет по плану
User avatar
нолька
рОвный
 
Posts: 264
Joined: 08 Apr 2007, 21:12
Group: Registered users

Postby CHRV » 02 Apr 2012, 08:36

justine wrote:Is the ZX Evo compatible with the ATM 2+ ?????

Keyb controller and IDE interface not compatible with ATM2

justine wrote:Can i flash the xbios rom on the EVO and run cp/m 2.2 as on the ATM 2+ ?????

It not work on EVO. But we plan to add CP/M intoEvo in future.
Многое есть здесь: www.nedopc.com
User avatar
CHRV
Желесяка
 
Posts: 966
Joined: 15 Apr 2007, 22:52
Group: Registered users

Postby Максагор » 03 Apr 2012, 03:39

It will be interesting to exanine this moment. CHRV answered absolutely correct, but theoretically xBIOS ca work on ZX-Evo besides it options of IDE HDD/CD boot. But in xBIOS don't realise working with such ZX-Evo possibilities as SD/FAT support, CMOS-Gluk or 14MHz regime. In addition RAM-disk vTR-DOS of ATM-turbo 2+ is situated in only "first" (law) megabyte (because it don'n know that RAM can be more bigger) and can't working with main part of soft us RAM higher than 128Kb, because it destroy virtual diskette in RAM. EVO-DOS for RAM-dick use memory higher then "first" Mb.

About ATM CP/M v2.2 - it used in ATM far time ago befor xBIOS was created in old MicroART ROM. We only copyed ROM of CP/M in new subj. It is not unpossible to start CP/M without using HDD on ZX-Evo (we need find "start-points" in ROM only and make presetting of memory config before), but for 100% functionality recuires to rewrite HDD-driver in CP/M ROM.
User avatar
Максагор
 
Posts: 281
Joined: 26 Apr 2010, 21:07
Location: Москва
Group: Registered users

Postby KAA » 03 Apr 2012, 11:44

Do communists learn foreign languages? ;-)

Может хватит флудить?

ЗЫ. Напомнить, сколько знал языков самый главный коммунист - Ленин?
И какие у него были оценки в "школе"? Вы лучше учились? На скольких мовах размовляете?
Отвечать лучше не тут.
KAA
 
Posts: 6
Joined: 11 May 2011, 20:34
Group: Registered users


Return to Пентева - софт и железо

Who is online

Users browsing this forum: No registered users and 1 guest