fat32 and fat16 hard drive issues

ZX evolution software and hardware

Postby justine » 25 Jul 2011, 21:03

Not sure just formatted with windows. What should they be to be compatible ?
User avatar
justine
 
Posts: 101
Joined: 06 Jul 2011, 00:50
Location: Scotland
Group: Registered users

Postby savelij » 25 Jul 2011, 21:21

Пока даже не знаю что сказать. Если отформатированно windows то таких проблем не было. Тем более на вновь отформатированном разделе. Не сталкивался с такой проблемой.
savelij
 
Posts: 568
Joined: 10 Jun 2008, 17:35
Group: Registered users

Postby justine » 26 Jul 2011, 10:33

Does someone have a basic program with some code that will write so many sectors direct to the hard drive then read them back to check my ide interface is ok ?
User avatar
justine
 
Posts: 101
Joined: 06 Jul 2011, 00:50
Location: Scotland
Group: Registered users

Postby Budder » 26 Jul 2011, 14:57

justine wrote:Does someone have a basic program with some code that will write so many sectors direct to the hard drive then read them back to check my ide interface is ok ?

TESTNEMO.zip
(1.93 KB) Downloaded 378 times

this little test uses only one sector on HDD (master). In cycle test writes to sector 2 data and then check it.

P.S. Use all tests from SCL image. If this test does not find errors, I'll do a more complex...
User avatar
Budder
 
Posts: 57
Joined: 20 Jul 2007, 15:05
Group: Registered users

Postby justine » 26 Jul 2011, 16:25

Thankyou Budder , i'll run them tests now and let you know how i get on.
User avatar
justine
 
Posts: 101
Joined: 06 Jul 2011, 00:50
Location: Scotland
Group: Registered users

Postby justine » 26 Jul 2011, 16:30

No errors shown on any test it just finishes and show big zeros on the screen and gives a menu to try again etc.
The last test rnd shows 32697.

Hope this is right ?
User avatar
justine
 
Posts: 101
Joined: 06 Jul 2011, 00:50
Location: Scotland
Group: Registered users

Postby Budder » 26 Jul 2011, 17:11

justine wrote:The last test rnd shows 32697


it seems, writing works incorrect.
32697 - is a count of bad bytes... Probably problem in hardware...

"TEST#RND.B" uses 512 bytes from Basic48 rom page (offset #0000) as a testing data...
User avatar
Budder
 
Posts: 57
Joined: 20 Jul 2007, 15:05
Group: Registered users

Postby justine » 26 Jul 2011, 17:12

So i have a fault Evo : ( ??
User avatar
justine
 
Posts: 101
Joined: 06 Jul 2011, 00:50
Location: Scotland
Group: Registered users

Postby CHRV » 26 Jul 2011, 17:31

justine wrote:So i have a fault Evo : ( ??

No this bug in configuration. I have this problem too.
Многое есть здесь: www.nedopc.com
User avatar
CHRV
Желесяка
 
Posts: 966
Joined: 15 Apr 2007, 22:52
Group: Registered users

Postby justine » 26 Jul 2011, 17:34

Thankyou CHRV i thought i had a faulty Evo or i was going mad lol
User avatar
justine
 
Posts: 101
Joined: 06 Jul 2011, 00:50
Location: Scotland
Group: Registered users

PreviousNext

Return to Пентева - софт и железо

Who is online

Users browsing this forum: No registered users and 1 guest

cron